M300 Droneport

OVERVIEW

Prepare, recharge and manage the flight cycle.

M300 combines temperature-controlled UAV storage, robotic battery replacement and charging in an automated drone station. It supports pre-flight and post-flight checks, automatic take-off and landing on the station platform, mission upload and data download from the aircraft.

Prepare the next flight

Preparation takes up to 55 seconds from standby or 185 seconds from storage mode. Robotic battery replacement is specified at two minutes, while charging takes up to 70 minutes per battery, with four batteries charging simultaneously. The station stores at least one UAV and eight batteries.

Maintain a controlled storage environment

The station operates in external temperatures from −40°C to +50°C and maintains an internal temperature of +15°C to +30°C. The enclosure has IP54 protection, a maximum size of 2,300 × 1,500 × 1,500 mm and a maximum weight of 400 kg. Remote and manual control support the operating workflow.

TECHNICAL DETAILS

Specifications

Maximum enclosure dimensions (L × W × H)	2,300 × 1,500 × 1,500 mm
Maximum station weight	400 kg
Manipulator payload capacity	At least 3 kg
Manipulator degrees of freedom	At least 5
External operating temperature	−40°C to +50°C
Internal temperature	+15°C to +30°C
Enclosure protection	IP54
Maximum wind speed	15 m/s
Maximum power consumption	4 kW
Supply frequency	50 ±3 Hz
Electrical connection type	TN-C-S
Maximum start-up time	130 seconds
Preparation from standby	55 seconds maximum
Preparation from storage	185 seconds maximum
Robotic battery replacement time	2 minutes
Charging time per battery	70 minutes maximum
Simultaneous battery charging	Up to 4 batteries
UAV storage capacity	At least 1 UAV
Battery storage capacity	At least 8 batteries
Simultaneous battery replacement	At least 2 batteries
Autonomous station operation	At least 60 minutes
Control modes	Remote and manual